How To Install A Heavy Kitchen Sink

A lot of people puzzle their heads when they try to some installation or repair at home.

Such as installing a heavy kitchen sink.

The good thing is that there are also ways to get no need to hire a professional.

Are you want to install a heavy kitchen sink?

Are you want to install a heavy kitchen sink

That the reason this article helps you a lot. This will ensure that you can still make the easy way to install the heavy kitchen sink. Check out!

Need Necessary Equipment

First, What do you need to install, and how do you analyze it? 

At this stage, it is also necessary to identify the electrical and hand tools needed to perform this task.

There are some tools that we point out that you have at hand when installing the kitchen sink.

Electric Equipment

Drill, Saw Glass, and Saw marble.

Others Equipment

Pillers, Measures tape, Wrench, Sealant, Pencil, and thread tape.

Having the equipment at home can be the perfect solution. So let’s began.

How To Install A Heavy Kitchen Sink?

Now that you have the install instructions and have the tools you’ll need. 

It’s time to installing the kitchen sink check out our step-by-step and solve this problem.

Step 1: Basic Measurements 

With the instruction or manual book read, you should already have a basis on installing a heavy kitchen sink.

Before starting, we recommended that you mark where you install or old kitchen sink.

Take note of the measurements of your countertop before you start with the project.

If you have a small kitchen, you do not have to install a huge sink. 

Just make sure that you are at least 2 inches away from the edge of the countertop when installing your sink.

Step 2: Place New Kitchen Measurements

Mark where your new sink will go.

Use a tape to make sure that measure position on your countertop. 

Marking your new sink position will ensure that you can install the sink properly since you can remove the old kitchen sink and replace it with the new one. 

Step 3: Remove Your Old Kitchen Sink

Note that it is best to remove the entire sink unit to make it easier to move around. 

Once everything has been removed, check your countertop for any leaks. 

If you find any, you’ll have to replace the whole sink right away, or else you risk having water seep out through the holes.

Step 4: Mark The Positioning Of Your New Sink

To ensure accuracy when installing the sink, it is best to mark the bottom and the top of your new sink. 

Keeping the positions will make it easier to cut the holes for the part of the screw.

Step 5: Screw The Sink Into The Countertop

You may have to use screws instead of nails since they are more durable. 

Once you’ve screwed the sink in, make sure that the basin drains to the drain hole located at the bottom of the heavy kitchen sink. 

Place the basin in position before you screw the sink in. The new heavy kitchen sink will fit precisely in the spot without any gaps.

Step 6: Secure The Sink In Place Using Clamps 

Clamps are ideal because they keep your hands free for other tasks. 

Get a few clamps from your local home improvement store and use them on the countertop and the base. 

Make sure that the clamps are tight significantly enough so that the sink cannot move.

Final Word

The steps above are just the necessary procedures in how to install a heavy kitchen sink. 

But there are other things to consider, such as the basin height and the drain pipe length. 

These are essential when it comes to selecting the right sink.

About Author

Lori S. Madden

Lori S. Madden

I am a Carpet and Rug Cleaning Specialist and the Writer of, a business based in the USA.

I have more than eight years of home decorating and staging experience.

so I’m not surprised that I became a writer after I got my degree.

I use my decorating knowledge to help a wide variety of audiences.

Leave a Comment